University of Colorado Boulder

Search

Table of Contents

Locations

1. Archive

   1. Completed Aug-Sep 2023 Floor Plan Edits

      • AERO3: add dotted lines for N340A and N340B
      • ATLS2B: remove line in room
      • C4C1: add doted lines for N192
      • C4C1: change to tan background
      • C4C1: remove line in room S169
      • C4C1B: change gray background to tan
      • C4C1B: change gray background to white
      • C4C1B: change to tan background
      • C4C2: expand tan background into N242A
      • C4C3: add room N380E
      • C4C4: update area
      • C4C4: update this area
      • CASE3: add dotted line below W322
      • CHEM1: decrease area of 116A and add door
      • CHEM1: remove doorway
      • CHEM1B: add doorway 16A
      • CHEM2: add doorway 216A
      • CHEM2: add wall bottom of 222A
      • CHEM2: add walls for 248C
      • CHEM2: change to gold background
      • CHEM2: update entire area
      • CHEM3: add doorway 316A
      • CHEM3: add dotted line between 320 and 321
      • CHEM3: increase area of room 353
      • CIRES1: add wall between 166 and 152
      • CIRES3: expand tan area in 324
      • CLRE3B: change to tan background
      • CLUB1: add doorway
      • DDW1: update to a smaller room D131
      • DDW2B: part of level 2B is floor 4 rendering
      • DLC3: remove line in room 350
      • DLC3: remove stairs and elevator icons
      • DUAN11: change to tan background
      • DUAN1: remove line in room
      • DUAN1: remove line in rooms
      • DUAN1B: add wall at top of G1B20A
      • DUAN2B: change to tan background
      • DUAN5: remove line in room
      • DUAN6: remove line in room
      • DUAN8: remove line in room
      • ECC2B: missing area at left
      • ECCR1B: add doorway
      • ECCR1B: add doorway at bottom of room
      • ECCR1B: add doorways for 1B46 and 1B45
      • ECCR1B: add stairs gold background
      • ECCR1B: change tan background to white
      • ECEE1: change to tan background
      • ECEE1B: add tan background, dotted line
      • ECEE1B: change to tan background
      • ECEE1B: change to tan background, add dotted line
      • ECEE2: change wall to dotted line
      • ECEE2: update area
      • ECEE3: change to tan background, minus stairs area
      • ECME1B: change tan background to white
      • ECME1B: change to tan background
      • ECOT6: expand bathroom area
      • ECOT7: change to tan background
      • EKLC1: add gold background, stairs
      • EKLC1B: update elevator area
      • EKLC2: change to tan background
      • EKLC2B: change to tan background
      • ENVD1B: add missing rooms
      • GOLD2B-4: update to include X areas
      • GOLD3B: change to white background
      • GOLD4: change to tan background
      • GOLD4: expand A420B area, remove wall
      • GUGG1: expand stairs gold area
      • HLMS2: change to tan background 299
      • HLMS3: add doorway
      • HLMS3: add tan background and dotted line 351
      • HLMS3: add wall at bottom of 313
      • HLMS3: add wall bottom of 361
      • HUMN1B: add stairs
      • HUMN1B: add tan background 1B99
      • INFO1: change to white background
      • INFO1: extend wall and change to tan background
      • JILA1: change to white background
      • JILA1B: add walls for B1B24A
      • JILA1B: add x area
      • JILA1B: add x area
      • JILA1B: adjust DUAN and JILA to add missing rooms
      • JILA1B: adjust stairs area
      • JILA1B: change to tan background
      • JILA1B: change white background to tan A1B38
      • JILA1B: remove walls in B1B30
      • JILA2: change to tan background
      • JILA2: change to tan background A224
      • JILA2: change to white background
      • JILA2: change to white background and have as exterior room
      • JILA2: change wall to dotted line
      • JILA2: change wall to dotted line
      • JILA2: this area is outside the building
      • JILA2B: add room A2B10A
      • JILA2B: add room A2B10B
      • JILA4: add wall
      • JILA4: add x area room
      • JIRA1: add tan background A139
      • KOBL1: remove line going into room
      • KOBL1: remove line going into room
      • KOBL2: change to tan background
      • KOBL3: change to tan background
      • KOBL3: change to tan background
      • KOBL3: change to tan background
      • KOBL3: remove gold, change to tan background
      • KOBL3: remove line going into room
      • KOBL3: remove line going into room
      • KOBL4: change to tan background
      • KTCH1: add doorway room 124
      • KTCH1: remove x area from 114F and 114G
      • KTCH1: remove x area from room 184A
      • KTCH1b: add dotted line between 1B31and 1B35
      • KTCH2: add Z285 area
      • KTCH2: add doorway top of 272
      • KTCH2: add dotted line and tan background
      • KTCH2: add dotted line and tan background
      • KTCH2: adjust area to include Z215
      • KTCH2: adjust area to include Z280 and x area
      • KTCH2: adjust this area to include Z210 and Y214
      • KTCH2: change to tan background
      • KTCH3: adjust 314 to remove x area
      • KTCH3: adjust 382 to remove x area
      • KTCH3: change to tan background
      • KTCH: add dotted line between 1B24 and 1B40
      • LIBR1: add doorway top middle of M101A
      • LIBR1: add dotted lines for M150H
      • LIBR1: change to tan background M199
      • LIBR1: update area
      • LIBR1B: add walls for elevator
      • LIBR1B: change to tan background E1B60
      • LIBR2: add doorway bottom left E290B
      • LIBR5: remove stairs icon
      • LSTR1: reduce area of 195A
      • LSTR1: remove stairs rendering
      • LSTR2: add tan background 201B
      • LSTR2: add tan background 202
      • LSTR2: add tan background and dotted lines 201A
      • MAIN1: adjust stairs area to indicated area
      • MAIN3: add dotted line around 385A
      • MAIN3: add dotted line bottom of 343
      • MAIN3: add tan background 301
      • MBE1: add dotted line, tan background for 175
      • MBE1: update area for room 177
      • MBE2: add dotted lines, tan background 272
      • MCKY1: change to tan background 103
      • MCKY1: change to tan background 112
      • MCKY2B: change to gold background
      • MCKY3B: change to gold background
      • MCKY3B: change to gray background
      • MCKY3B: increase stairs area to all gold background
      • MCOL1: change to gold background for stairs
      • MCOL1B: change to tan background for E1B56
      • MCOL1B: remove elevator icon
      • MCOL1B: remove stairs icons
      • MCOL3: add dotted line between W337A and W337
      • MUEN1B: expand D040B
      • MUEN1B: expand room D040, remove walls
      • MUEN1B: update tan area for E013
      • MUEN2B: add tan background
      • MUEN4: remove this area from rendering
      • MUS1: add wall, door right of S130
      • MUS1: change to gray background, 2 rooms
      • MUS1: change to tan background N190
      • PORT1: add doorways or update location of doors
      • PORT1: remove x area from elevator
      • PORT1B: remove x area from elevator
      • PORT2: remove line in middle of room
      • PORT2: remove x area from elevator
      • PORT2B: change wall to dotted line
      • PORT3: add tan background, dotted line B334B
      • PORT3: remove x area from elevator
      • PORT4: remove area
      • PORT4: remove x area from elevator
      • PORT5: change wall to dotted line
      • RAMY1: change to tan background
      • RAMY1: change to tan background
      • RAMY2: add dotted line, tan background, C248
      • RAMY3: update C389 area
      • RAMY4: add wall/door at left of C405D
      • RAMY4: change to white background
      • REC1: add corridor
      • REC2: add tan background A203
      • REC2: change to white background C235
      • SEEC2: change to white background
      • SEEL2: add tan background, dotted line for 201
      • SEEL4: change to gold background for elevator
      • SEEL4: not elevator change to tan background and no doorway
      • SLHS1: change to tan background
      • SLHS1: change to tan background
      • SLHS1: remove all labels in rendering
      • SPSC1: add tan background W110
      • SPSC1: add wall at right of N180B
      • SPSC2: change to tan background W214
      • SPSC3: add tan background E370
      • THTR1B: add walls and door W1B55B
      • UMC1: add X area
      • UMC1: expand room 109
      • UMC2: add wall and door for separate bathroom
      • UMC3: update 381 room and walls
      • VAC1: remove 2 lines going into rooms
      • VAC1B: expand room 1B93
      • VAC2: remove line going into room
      • WDBY1: add dotted lines, tan background
      • WDBY1B: change white background to tan
      • WLAW1: change to gray background
      • WLAW1: reduce area of 100C to exclude x area
      • WLAW1: remove stairs icon
      • WLAW5: remove x area from room 530